Based on the easy accessibility and style point of view, everything is made up of zipping. Everything like school bags, handbags, and even dresses also have zips. So, it is better to know simple solutions for any kind of zipper problems. Here are the common problems and solutions with zipper.
THE ZIPPER DOSN’T MOVE:
In this problem the zipper won’t move up and down.it is stuck in one position and sometimes the zip is difficult to move. To solve this kind of problem, first, you need to check anything is stuck in the teeth of the zip. If you found anything like threads or any dust then remove it first.
Once you confirmed that there is nothing in the teeth of the zip then the first solution is to rub the pencil tip on the teeth of the zip and then Move forward and backward fastly. Most of the zip problems are solved by using this technique.
If the above technique won’t solve your problem then go to lubrication. Yes, this makes your zipper teeth smooth and move easily. For this, apply any kind of gel, vaseline, lip balm, any soap, or grease on the teeth of the zip to fix the problem. If you feel these gels are oil then apply to rub crayon wax(because it is not oily) as lubrication. It is available in any stores.
PROBLEM WITH SLIDER:
If the zip teeth are not straight then the zipper is open and not run forward. So to fix this problem, you need to check the teeth is straight and there are no more bents. If it is not straight then you have to fix and make straight it by using pliers.
Another problem with the slider is due to the uneven distance between slider and teeth. In this case, the zipper is open and not run forward. So this can be fixed by tightening the two ends of the zip slider by using a plier
PROBLEM WITH MISSING BOTTOM TEETH:
if the one side of the teeth come out then this technique is used.
By using plier take the two edges of the zip and tack. Tack is a peace that secures the two edges of the zip. By removing the tack you can easily access the teeth. Then place the slider and add a new tack or combine both edges by sewing with thread.
PROBLEM WITH BROKEN PULL:
If your zip pull has been broken then it is difficult to close or open a zip. This problem can be solved by placing any support to it. Use a wire, cable, rubber band, paper clip, or keyring as a support. you have to place any one of the above in zip pull hole to fix this problem.
PROBLEM WITH ZIPPER WON’T STAY UP:
This is one of the common problems in the jeans pant. Due to extra fat in the stomach or the Zip itself became loose. you can fix this problem by adding a ring to sliding pull and connect this ring to your jeans pant button to temporarily overcome this problem but the permanent solution to this problem is you have to replace the whole zipper by a new one.
Comments
Post a Comment